Skip to content
Fault code dictionary (DTC)

P0C73 — Power electronics coolant pump A: control performance fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit commanded pump A, which circulates coolant through the power electronics (inverter and converters), and the response was not what it expected. The pump may be running too slowly, too fast, or not following the command. Which circuit pump A serves varies by manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid/EV fault light on
Limited power when the car gets hot
Overheating warning from the hybrid system
Pump noisy or not audible at all
Cooling fans running constantly

Common causes

Worn pump A or a seized impeller
Low coolant level or air in the circuit
Faulty pump connector or power supply
Partly blocked hoses or radiator
Fault in the control circuit inside the control unit

What to do

First check the level of the power electronics coolant, which is a separate circuit from the engine coolant, and whether the pump can be heard running with the car on. If a temperature warning appears, stop and let it cool: power electronics are damaged by heat. Do not open any high-voltage component.

How to read code P0C73

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C73 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (73) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C73 mean?

Power electronics coolant pump A: control performance fault. The control unit commanded pump A, which circulates coolant through the power electronics (inverter and converters), and the response was not what it expected. The pump may be running too slowly, too fast, or not following the command. Which circuit pump A serves varies by manufacturer.

Can I keep driving with code P0C73 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C73

Worn pump A or a seized impeller Low coolant level or air in the circuit Faulty pump connector or power supply Partly blocked hoses or radiator Fault in the control circuit inside the control unit

How do you fix code P0C73?

First check the level of the power electronics coolant, which is a separate circuit from the engine coolant, and whether the pump can be heard running with the car on. If a temperature warning appears, stop and let it cool: power electronics are damaged by heat. Do not open any high-voltage component.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes