Skip to content
Fault code dictionary (DTC)

P0C7A — Drive motor B inverter voltage too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a voltage beyond the permitted limit at the inverter of drive motor B. It is the same kind of fault as the motor A code, for the second motor. The system reduces or cuts traction to protect the electronics. Which motor is B varies by manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid/EV fault light on
Limited power or traction disappearing
Limp mode
Hybrid or electric system warning on the dashboard
Sudden system shutdown

Common causes

Faulty inverter B voltage sensor
Voltage converter not regulating well
Error in system voltage control
Degraded inverter capacitors
Internal fault in the inverter or control unit

What to do

If traction drops, stop in a safe place and do not push on. A scan tool diagnosis by personnel qualified for high voltage is needed. Do not open covers or touch orange cables.

How to read code P0C7A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C7A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (7A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C7A mean?

Drive motor B inverter voltage too high. The control unit detected a voltage beyond the permitted limit at the inverter of drive motor B. It is the same kind of fault as the motor A code, for the second motor. The system reduces or cuts traction to protect the electronics. Which motor is B varies by manufacturer.

Can I keep driving with code P0C7A active?

With caution: limp mode possible, have it checked soon

Common causes — P0C7A

Faulty inverter B voltage sensor Voltage converter not regulating well Error in system voltage control Degraded inverter capacitors Internal fault in the inverter or control unit

How do you fix code P0C7A?

If traction drops, stop in a safe place and do not push on. A scan tool diagnosis by personnel qualified for high voltage is needed. Do not open covers or touch orange cables.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes