P0C79 — Drive motor A inverter voltage too high
| Meaning | The control unit measured a voltage above the permitted limit at the inverter that powers drive motor A. The inverter converts the battery's direct current into the current that moves the motor. Excess voltage can damage it, so the system limits or stops traction. Which motor is A depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or sudden loss of drive
Car in limp mode
Hybrid or electric system message
System shutting down while driving
Common causes
Fault in the converter that regulates voltage
Problem in system voltage control
Degraded inverter capacitors
Internal fault in the inverter or control unit
What to do
How to read code P0C79
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C79 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (79) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C79 mean?
Drive motor A inverter voltage too high. The control unit measured a voltage above the permitted limit at the inverter that powers drive motor A. The inverter converts the battery's direct current into the current that moves the motor. Excess voltage can damage it, so the system limits or stops traction. Which motor is A depends on the manufacturer.
Can I keep driving with code P0C79 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C79
Inverter voltage sensor reading incorrectly Fault in the converter that regulates voltage Problem in system voltage control Degraded inverter capacitors Internal fault in the inverter or control unit
How do you fix code P0C79?
If power drops or a warning appears, pull over safely and do not push on. Have the inverter data read by a qualified workshop: this is not a check to do yourself, because of the high voltage.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C78 — High-voltage system precharge time too long
- Next code: P0C7A — Drive motor B inverter voltage too high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open