P0C90 — Drive Motor A Control Module Communication Circuit
| Meaning | Your vehicle's powertrain control system has detected a communication issue involving the control module for Drive Motor A. This means the main computer is not receiving or sending signals properly to the specific inverter or control unit managing that electric motor. |
| Family | Powertrain (P) |
Typical symptoms
The vehicle may enter a restricted power or limp mode
Certain hybrid or electric drive functions might be temporarily disabled
Common causes
Damaged wiring harness between the powertrain control module and the motor control unit
Internal failure within the drive motor control module
What to do
How to read code P0C90
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C90 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (90) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C90 mean?
Drive Motor A Control Module Communication Circuit. Your vehicle's powertrain control system has detected a communication issue involving the control module for Drive Motor A. This means the main computer is not receiving or sending signals properly to the specific inverter or control unit managing that electric motor.
Can I keep driving with code P0C90 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C90
Loose or corroded electrical connectors at the hybrid inverter or drive motor module Damaged wiring harness between the powertrain control module and the motor control unit Internal failure within the drive motor control module
How do you fix code P0C90?
Have a technician inspect the wiring harness and connectors related to the hybrid or electric drive system as soon as possible. Because this involves high-voltage components and critical drive modules, avoid driving the vehicle if it shows severe performance limitations.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C8F — Hybrid Battery Pack Current Sensor Circuit Malfunc...
- Next code: P0C91 — Hybrid Inverter Coolant Flow Pump Control Performa...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open