P0C91 — Hybrid Inverter Coolant Flow Pump Control Performance
| Meaning | The engine control computer has detected a performance issue with the coolant pump control circuit dedicated to the hybrid system inverter. This means the electric components responsible for managing power in your hybrid system are not getting the expected cooling flow. |
| Family | Powertrain (P) |
Typical symptoms
Vehicle may limit power or enter a protective limp mode
Cooling fan running loudly or constantly
Common causes
Air trapped in the hybrid inverter cooling system
Electrical wiring or connector damage to the pump
Blown fuse related to the cooling pump circuit
What to do
How to read code P0C91
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C91 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (91) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C91 mean?
Hybrid Inverter Coolant Flow Pump Control Performance. The engine control computer has detected a performance issue with the coolant pump control circuit dedicated to the hybrid system inverter. This means the electric components responsible for managing power in your hybrid system are not getting the expected cooling flow.
Can I keep driving with code P0C91 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C91
Failing auxiliary coolant pump Air trapped in the hybrid inverter cooling system Electrical wiring or connector damage to the pump Blown fuse related to the cooling pump circuit
How do you fix code P0C91?
Check the coolant level in the hybrid inverter reservoir and inspect the fuses first. Address this issue promptly to prevent the inverter from overheating and shutting down the vehicle.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C90 — Drive Motor A Control Module Communication Circuit
- Next code: P0C92 — Anomalia Circuito Controllo Pressione Pompa Carbur...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open