Skip to content
Fault code dictionary (DTC)

P0C98 — Hybrid Inverter Coolant Flow Control Valve B Control Circuit High

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningYour car's hybrid system computer has detected an electrical voltage that is too high in the control circuit for the hybrid inverter coolant flow valve, labeled as valve B. This valve helps manage the temperature of the high-voltage electrical components by directing coolant flow where it is needed. When the circuit stays at a high voltage, the computer cannot properly command the valve to open or close.
FamilyPowertrain (P)

Typical symptoms

The check engine light is illuminated on your dashboard
A hybrid system warning message may appear on the instrument cluster
The vehicle may limit hybrid drive power to protect the electrical components from overheating

Common causes

Electrical short to voltage in the wiring harness leading to the coolant valve
A faulty coolant flow control valve actuator
A damaged or corroded connector at the control valve

What to do

You should have a technician check the wiring harness, connectors, and the valve itself for electrical faults as soon as possible. Because this relates to the cooling of the high-voltage hybrid system, it is best not to delay the inspection to avoid potential component overheating.

How to read code P0C98

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C98 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (98) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C98 mean?

Hybrid Inverter Coolant Flow Control Valve B Control Circuit High. Your car's hybrid system computer has detected an electrical voltage that is too high in the control circuit for the hybrid inverter coolant flow valve, labeled as valve B. This valve helps manage the temperature of the high-voltage electrical components by directing coolant flow where it is needed. When the circuit stays at a high voltage, the computer cannot properly command the valve to open or close.

Can I keep driving with code P0C98 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C98

Electrical short to voltage in the wiring harness leading to the coolant valve A faulty coolant flow control valve actuator A damaged or corroded connector at the control valve

How do you fix code P0C98?

You should have a technician check the wiring harness, connectors, and the valve itself for electrical faults as soon as possible. Because this relates to the cooling of the high-voltage hybrid system, it is best not to delay the inspection to avoid potential component overheating.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes