P0C99 — Hybrid Inverter Coolant Flow Control Circuit
| Meaning | The powertrain control module has detected an issue with the control circuit responsible for regulating the hybrid system's coolant flow. This means the electronics that drive the electric motor are not getting the reliable coolant circulation the system expects. |
| Family | Powertrain (P) |
Typical symptoms
Hybrid system performance limitation or shutdown message
Electric drive may temporarily disengage
Common causes
Wiring harness damage or loose electrical connector
Internal failure within the hybrid inverter control module
What to do
How to read code P0C99
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C99 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (99) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C99 mean?
Hybrid Inverter Coolant Flow Control Circuit. The powertrain control module has detected an issue with the control circuit responsible for regulating the hybrid system's coolant flow. This means the electronics that drive the electric motor are not getting the reliable coolant circulation the system expects.
Can I keep driving with code P0C99 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C99
Faulty coolant pump or control valve Wiring harness damage or loose electrical connector Internal failure within the hybrid inverter control module
How do you fix code P0C99?
Check the auxiliary cooling pump operation and the electrical connections feeding it as soon as possible. Avoid heavy driving until this is checked, because the hybrid system needs proper cooling to prevent overheating.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C98 — Hybrid Inverter Coolant Flow Control Valve B Contr...
- Next code: P0C9A — Battery temperature sensor L: signal too high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open