P0CC6 — Charge port door: open request switch wake-up circuit fault
| Meaning | The control unit detected a problem in the circuit that wakes up the system when the charge port door open button is pressed. In practice, the button press may not be recognised as it should be. The exact definition depends on the manufacturer, so the button location and operating logic can vary from model to model. |
| Family | Powertrain (P) |
Typical symptoms
Charging system warning light or message
Door opens only by other means (key, app, interior control)
Button seems to give no response
Difficulty starting a charge
Common causes
Corroded or loose button connector
Broken wire in the wake-up circuit
Moisture in the door assembly
Faulty door control module
What to do
How to read code P0CC6
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0CC6 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (C6) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0CC6 mean?
Charge port door: open request switch wake-up circuit fault. The control unit detected a problem in the circuit that wakes up the system when the charge port door open button is pressed. In practice, the button press may not be recognised as it should be. The exact definition depends on the manufacturer, so the button location and operating logic can vary from model to model.
Can I keep driving with code P0CC6 active?
With caution: limp mode possible, have it checked soon
Common causes — P0CC6
Worn or dirty open button Corroded or loose button connector Broken wire in the wake-up circuit Moisture in the door assembly Faulty door control module
How do you fix code P0CC6?
Try opening the door by another method provided by the manufacturer and check whether the button is dirty or stuck. The fault does not affect driving but can stop you from charging, so have the system checked in a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0CC5 — 14 V power module: current sensors A and B do not...
- Next code: P0CC7 — Charge port door: open request switch circuit faul...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open