Skip to content
Fault code dictionary (DTC)

P0CC5 — 14 V power module: current sensors A and B do not correlate

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit compared the two current sensors in the 14 volt power module, the converter that feeds the car's conventional electrical system from the traction battery, and found values that do not agree with each other. One of the sensors may be reading incorrectly, or the module itself has a problem. The exact meaning can vary by manufacturer, so the data needs to be read with a proper tool.
FamilyPowertrain (P)

Typical symptoms

Powertrain or hybrid/EV system warning light on
12 V battery discharging more than normal
Lights or displays dimming or flickering
Electrical system fault messages
Difficult or impossible system start-up

Common causes

Faulty current sensor inside the module
14 V converter module with an internal fault
Corroded or loose module connectors or wiring
Weak 12 V battery distorting the readings
Missing software update or communication error

What to do

First check the condition and charge of the 12 V battery and its terminals. If the car shuts down or electrical warnings appear, do not put off the check: losing on-board power can leave you stranded.

How to read code P0CC5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CC5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (C5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CC5 mean?

14 V power module: current sensors A and B do not correlate. The control unit compared the two current sensors in the 14 volt power module, the converter that feeds the car's conventional electrical system from the traction battery, and found values that do not agree with each other. One of the sensors may be reading incorrectly, or the module itself has a problem. The exact meaning can vary by manufacturer, so the data needs to be read with a proper tool.

Can I keep driving with code P0CC5 active?

With caution: limp mode possible, have it checked soon

Common causes — P0CC5

Faulty current sensor inside the module 14 V converter module with an internal fault Corroded or loose module connectors or wiring Weak 12 V battery distorting the readings Missing software update or communication error

How do you fix code P0CC5?

First check the condition and charge of the 12 V battery and its terminals. If the car shuts down or electrical warnings appear, do not put off the check: losing on-board power can leave you stranded.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes