P0CFB — Control pilot charging switch A circuit high
| Meaning | The control unit detected a voltage that is too high in the circuit of the switch managing the charging control pilot signal. It can indicate a short to supply or a faulty control component. Details depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging error message
Malfunction or electrical system warning light on
Charging stopping shortly after starting
Normal driving
Common causes
Damaged or corroded connector
Faulty charging switch
Onboard charger with an internal fault
Faulty charge control unit
What to do
How to read code P0CFB
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0CFB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (FB) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0CFB mean?
Control pilot charging switch A circuit high. The control unit detected a voltage that is too high in the circuit of the switch managing the charging control pilot signal. It can indicate a short to supply or a faulty control component. Details depend on the manufacturer.
Can I keep driving with code P0CFB active?
With caution: limp mode possible, have it checked soon
Common causes — P0CFB
Wiring touching a supply voltage Damaged or corroded connector Faulty charging switch Onboard charger with an internal fault Faulty charge control unit
How do you fix code P0CFB?
Try other cables and stations, and have the wiring and connectors of the charging system checked. If charging is impossible, have the car checked without forcing the connector.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0CFA — Control pilot charging switch A circuit low
- Next code: P0CFC — Control pilot charging switch A intermittent/errat...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open