Skip to content
Fault code dictionary (DTC)

P0CFC — Control pilot charging switch A intermittent/erratic

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe circuit of the switch managing the charging control pilot signal gives an unstable signal that comes and goes. It usually points to an uncertain contact in the wiring or connectors, or a component failing at times.
FamilyPowertrain (P)

Typical symptoms

Charging starting and stopping by itself
Intermittent charging error message
Warning light appearing and disappearing
Problem linked to vibration or moisture
Behavior differing from one charge to the next

Common causes

Connector with uncertain contact
Wiring partly broken or chafed
Moisture in the connector
Charging switch with an intermittent fault
Onboard charger failing at times

What to do

Have the connectors and wiring checked, moving the wires during the diagnostic reading. Also try other cables and stations to rule out external causes.

How to read code P0CFC

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CFC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (FC) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CFC mean?

Control pilot charging switch A intermittent/erratic. The circuit of the switch managing the charging control pilot signal gives an unstable signal that comes and goes. It usually points to an uncertain contact in the wiring or connectors, or a component failing at times.

Can I keep driving with code P0CFC active?

With caution: limp mode possible, have it checked soon

Common causes — P0CFC

Connector with uncertain contact Wiring partly broken or chafed Moisture in the connector Charging switch with an intermittent fault Onboard charger failing at times

How do you fix code P0CFC?

Have the connectors and wiring checked, moving the wires during the diagnostic reading. Also try other cables and stations to rule out external causes.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes