P0D93 — Charge port lock control circuit high voltage
| Meaning | The control unit measured a voltage that is too high in the control circuit of the charge connector lock. The signal to the actuator exceeds the expected range. |
| Family | Powertrain (P) |
Typical symptoms
Charging does not start
An error message at the port
Plug cannot be removed
Powertrain warning light on
Common causes
Damaged actuator connector
Faulty lock actuator
Damaged wiring
Fault in the control module
What to do
How to read code P0D93
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D93 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D93 mean?
Charge port lock control circuit high voltage. The control unit measured a voltage that is too high in the control circuit of the charge connector lock. The signal to the actuator exceeds the expected range.
Can I keep driving with code P0D93 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D93
Control wire touching a power supply line Damaged actuator connector Faulty lock actuator Damaged wiring Fault in the control module
How do you fix code P0D93?
Inspect the port and connector for bent pins or burn marks. Have the circuit checked soon, since an abnormal voltage can damage the actuator.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D92 — Charge port lock control circuit low voltage
- Next code: P0D94 — Charge port lock control circuit performance
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range