Skip to content
Fault code dictionary (DTC)

P0D94 — Charge port lock control circuit performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe charge connector lock circuit is electrically intact, but the lock does not behave as the control unit expects. It may be slow, incomplete or fail to reach position. The manufacturer defines the exact criteria for this check.
FamilyPowertrain (P)

Typical symptoms

Plug locks with difficulty or not fully
Charging starts then stops
An error message at the port
Plug stays locked
Powertrain warning light on

Common causes

Worn or seized lock actuator
Dirt or foreign objects in the port
Plug or cable with a deformed pin
Ice or moisture in the mechanism
Weak contact in the connector
Fault in the control module

What to do

Carefully clean the outside of the port and try a different plug. If the problem remains, have the mechanism checked soon, without forcing anything.

How to read code P0D94

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D94 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D94 mean?

Charge port lock control circuit performance. The charge connector lock circuit is electrically intact, but the lock does not behave as the control unit expects. It may be slow, incomplete or fail to reach position. The manufacturer defines the exact criteria for this check.

Can I keep driving with code P0D94 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D94

Worn or seized lock actuator Dirt or foreign objects in the port Plug or cable with a deformed pin Ice or moisture in the mechanism Weak contact in the connector Fault in the control module

How do you fix code P0D94?

Carefully clean the outside of the port and try a different plug. If the problem remains, have the mechanism checked soon, without forcing anything.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes