Skip to content
Fault code dictionary (DTC)

P0D95 — Charge port unlock control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit finds no continuity in the circuit that commands unlocking of the connector in the charge port. With the circuit open, the car cannot reliably command the unlock, and the plug may stay locked in.
FamilyPowertrain (P)

Typical symptoms

Plug cannot be removed after charging
An error message at the port
Charging does not start
Lock seems unresponsive
Powertrain warning light on

Common causes

Actuator connector unplugged or loose
Broken wire or corroded terminal
Faulty unlock actuator
Damaged wiring near the port
Fault in the control module

What to do

If the plug is stuck, do not force it: check the owner's manual for an emergency release. Then have the circuit checked soon.

How to read code P0D95

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D95 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D95 mean?

Charge port unlock control circuit open. The control unit finds no continuity in the circuit that commands unlocking of the connector in the charge port. With the circuit open, the car cannot reliably command the unlock, and the plug may stay locked in.

Can I keep driving with code P0D95 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D95

Actuator connector unplugged or loose Broken wire or corroded terminal Faulty unlock actuator Damaged wiring near the port Fault in the control module

How do you fix code P0D95?

If the plug is stuck, do not force it: check the owner's manual for an emergency release. Then have the circuit checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes