Skip to content
Fault code dictionary (DTC)

P0073 — Ambient air temperature sensor circuit high

Severity: Informational Can you drive? Yes, no known limitation Make: All makes (OBD-II standard)
MeaningThe engine computer receives too high an electrical signal from the outside temperature sensor. In practice it sees a very low temperature or an open circuit. The sensor or its wiring is not working correctly.
FamilyPowertrain (P)

Typical symptoms

Outside temperature shown as very low or as dashes
Unreliable automatic climate control
Check engine light on
No other obvious symptoms

Common causes

Unplugged or corroded sensor connector
Broken wire
Faulty or broken sensor
Damaged wiring
Computer problem, uncommon

What to do

First check that the connector is fully seated and the wire is intact. It isn't urgent for safety, but it is worth repairing so the climate control works properly.

How to read code P0073

This is an informational entry: it normally does not limit how the vehicle works.

The code P0073 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (73) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0073 mean?

Ambient air temperature sensor circuit high. The engine computer receives too high an electrical signal from the outside temperature sensor. In practice it sees a very low temperature or an open circuit. The sensor or its wiring is not working correctly.

Can I keep driving with code P0073 active?

Yes, no known limitation

Common causes — P0073

Unplugged or corroded sensor connector Broken wire Faulty or broken sensor Damaged wiring Computer problem, uncommon

How do you fix code P0073?

First check that the connector is fully seated and the wire is intact. It isn't urgent for safety, but it is worth repairing so the climate control works properly.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes