Skip to content
Fault code dictionary (DTC)

P00A0 — Charge air cooler temperature sensor circuit fault, bank 2

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer found an electrical problem in the sensor that measures air temperature after the intercooler on bank 2. This general code does not specify the type of fault. Bank 2 means the other half of the engine, on V engines or those with two boosted air paths.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power
Turbo seeming less effective
Uneven idle or running
Possible limp mode with reduced power

Common causes

Corroded or loose sensor connector
Damaged sensor wiring
Faulty charge air temperature sensor
Faulty power supply or ground to the sensor
Damaged computer input, which is rare

What to do

Check the bank 2 sensor's connector and wiring and use a scan tool to see whether the value it reads is plausible. If power is reduced, drive carefully and have it checked soon, because the computer is working with unreliable data.

How to read code P00A0

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00A0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (A0) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00A0 mean?

Charge air cooler temperature sensor circuit fault, bank 2. The engine computer found an electrical problem in the sensor that measures air temperature after the intercooler on bank 2. This general code does not specify the type of fault. Bank 2 means the other half of the engine, on V engines or those with two boosted air paths.

Can I keep driving with code P00A0 active?

With caution: limp mode possible, have it checked soon

Common causes — P00A0

Corroded or loose sensor connector Damaged sensor wiring Faulty charge air temperature sensor Faulty power supply or ground to the sensor Damaged computer input, which is rare

How do you fix code P00A0?

Check the bank 2 sensor's connector and wiring and use a scan tool to see whether the value it reads is plausible. If power is reduced, drive carefully and have it checked soon, because the computer is working with unreliable data.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes