P00A1 — Charge air cooler temperature sensor reading not plausible, bank 2
| Meaning | The signal from the air temperature sensor after the intercooler on bank 2 is present, but the engine computer finds it hard to believe compared with other data, such as intake air temperature or the other bank. The sensor may be aged or dirty, or the intercooler may not be working well. |
| Family | Powertrain (P) |
Typical symptoms
Drop in performance
Turbo less lively
Idle not perfectly smooth
Possible power reduction by the computer
Common causes
High resistance electrical contact in the connector
Dirty, blocked or inefficient intercooler
Air leak in the boost circuit
Badly fitted or damaged sensor
What to do
How to read code P00A1
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00A1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (A1) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00A1 mean?
Charge air cooler temperature sensor reading not plausible, bank 2. The signal from the air temperature sensor after the intercooler on bank 2 is present, but the engine computer finds it hard to believe compared with other data, such as intake air temperature or the other bank. The sensor may be aged or dirty, or the intercooler may not be working well.
Can I keep driving with code P00A1 active?
With caution: limp mode possible, have it checked soon
Common causes — P00A1
Temperature sensor reading slowly or off calibration High resistance electrical contact in the connector Dirty, blocked or inefficient intercooler Air leak in the boost circuit Badly fitted or damaged sensor
How do you fix code P00A1?
With a scan tool, compare bank 2 values with bank 1 and with ambient temperature on a cold engine. Then check the connector, hoses and intercooler. It is usually not an emergency, but it should not be ignored.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00A0 — Charge air cooler temperature sensor circuit fault...
- Next code: P00A2 — Charge air cooler temperature sensor signal too lo...
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2