P00B0 — Turbo/supercharger boost control module B performance
| Meaning | The control unit detected that the second module (module "B") controlling boost pressure is not working as expected. The code refers to performance, not to a specific electrical fault. What exactly module B is depends on the manufacturer, and I cannot say for certain without knowing the make. |
| Family | Powertrain (P) |
Typical symptoms
Loss of power
Uneven turbo boost
Unusual noises from the turbo
Power limited by protection mode
Common causes
Stuck or dirty control valve or actuator
Cracked or disconnected vacuum line
Damaged turbine or compressor
Faulty pressure sensor
Clogged air filter or blocked exhaust
What to do
How to read code P00B0
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00B0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (B0) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00B0 mean?
Turbo/supercharger boost control module B performance. The control unit detected that the second module (module "B") controlling boost pressure is not working as expected. The code refers to performance, not to a specific electrical fault. What exactly module B is depends on the manufacturer, and I cannot say for certain without knowing the make.
Can I keep driving with code P00B0 active?
With caution: limp mode possible, have it checked soon
Common causes — P00B0
Leaking air hoses or pipes Stuck or dirty control valve or actuator Cracked or disconnected vacuum line Damaged turbine or compressor Faulty pressure sensor Clogged air filter or blocked exhaust
How do you fix code P00B0?
First check the air hoses and vacuum connections of the boost system, looking for cracks, loose clamps or traces of oil. If power is limited, use the car as little as possible and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00AF — Turbocharger boost control module performance
- Next code: P00B1 — Radiator coolant temperature sensor circuit fault
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2