Skip to content
Fault code dictionary (DTC)

P00AF — Turbocharger boost control module performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the system regulating turbo pressure is not working as expected. The code points to a performance problem in the control module, but does not say which part is the cause. The exact meaning of the module can differ between manufacturers, so it needs to be checked for your make.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power, especially when accelerating
Turbo giving too little or too much boost
Whistling or unusual noises from the turbo
Engine in protection mode with limited power

Common causes

Leaking air hoses or pipes
Stuck or dirty turbo control valve
Faulty turbo actuator or cracked vacuum line
Turbine with play or damage
Faulty boost pressure sensor
Heavily clogged air filter or blocked exhaust

What to do

First check the air hoses between turbo, intercooler and manifold, looking for loose clamps, cracks or traces of oil. If power is limited or you hear loud noises from the turbo, use the car as little as possible and have it checked soon, because a turbo in poor condition can get damaged.

How to read code P00AF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00AF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (AF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00AF mean?

Turbocharger boost control module performance. The control unit detected that the system regulating turbo pressure is not working as expected. The code points to a performance problem in the control module, but does not say which part is the cause. The exact meaning of the module can differ between manufacturers, so it needs to be checked for your make.

Can I keep driving with code P00AF active?

With caution: limp mode possible, have it checked soon

Common causes — P00AF

Leaking air hoses or pipes Stuck or dirty turbo control valve Faulty turbo actuator or cracked vacuum line Turbine with play or damage Faulty boost pressure sensor Heavily clogged air filter or blocked exhaust

How do you fix code P00AF?

First check the air hoses between turbo, intercooler and manifold, looking for loose clamps, cracks or traces of oil. If power is limited or you hear loud noises from the turbo, use the car as little as possible and have it checked soon, because a turbo in poor condition can get damaged.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes