P00B2 — Radiator coolant temperature sensor reading implausible
| Meaning | The control unit is receiving from the coolant temperature sensor at the radiator outlet a value that does not match the other engine conditions. For example the temperature stays fixed or changes too slowly. The electrical circuit may be fine: the doubt is about the accuracy of the reading. |
| Family | Powertrain (P) |
Typical symptoms
Fans behaving oddly
Temperature gauge that looks unreliable
Engine slow to warm up or running too hot
Fuel consumption slightly off
Common causes
Faulty sensor
Low coolant or air in the cooling circuit
Connector with poor contact
Thermostat not working well
Coolant circulation problem
What to do
How to read code P00B2
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00B2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (B2) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00B2 mean?
Radiator coolant temperature sensor reading implausible. The control unit is receiving from the coolant temperature sensor at the radiator outlet a value that does not match the other engine conditions. For example the temperature stays fixed or changes too slowly. The electrical circuit may be fine: the doubt is about the accuracy of the reading.
Can I keep driving with code P00B2 active?
With caution: limp mode possible, have it checked soon
Common causes — P00B2
Aged sensor reading inaccurately Faulty sensor Low coolant or air in the cooling circuit Connector with poor contact Thermostat not working well Coolant circulation problem
How do you fix code P00B2?
First check the coolant level with the engine cold and the condition of the sensor connector. If the temperature gauge climbs abnormally, stop and do not keep driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00B1 — Radiator coolant temperature sensor circuit fault
- Next code: P00B3 — Radiator coolant temperature sensor signal low
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2