Skip to content
Fault code dictionary (DTC)

P00B6 — Radiator and engine coolant temperature do not correlate

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit compares the coolant temperature at the radiator outlet with the coolant temperature in the engine, and found that the two values do not agree with each other. It can be a sensor reading wrong, but also a real coolant circulation problem. That is why it should be taken seriously.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Abnormal temperature gauge
Fans behaving oddly
Weak or inconsistent cabin heating
Engine running hotter than normal

Common causes

Inaccurate or faulty temperature sensor (radiator or engine)
Stuck thermostat or one not working well
Low coolant level or air in the circuit
Water pump with poor circulation
Partly clogged radiator
Connector or wiring with poor contact

What to do

First check the coolant level with the engine cold, and never open the cap on a hot engine. If the gauge climbs abnormally, stop and have the car checked: do not keep driving with an overheating engine.

How to read code P00B6

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00B6 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (B6) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00B6 mean?

Radiator and engine coolant temperature do not correlate. The control unit compares the coolant temperature at the radiator outlet with the coolant temperature in the engine, and found that the two values do not agree with each other. It can be a sensor reading wrong, but also a real coolant circulation problem. That is why it should be taken seriously.

Can I keep driving with code P00B6 active?

With caution: limp mode possible, have it checked soon

Common causes — P00B6

Inaccurate or faulty temperature sensor (radiator or engine) Stuck thermostat or one not working well Low coolant level or air in the circuit Water pump with poor circulation Partly clogged radiator Connector or wiring with poor contact

How do you fix code P00B6?

First check the coolant level with the engine cold, and never open the cap on a hot engine. If the gauge climbs abnormally, stop and have the car checked: do not keep driving with an overheating engine.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes