P00B7 — Engine coolant flow low or not as expected
| Meaning | The control unit detected that the coolant in the engine is circulating less than it should, or not correctly. The code points to a circulation problem, but does not say which component is the cause. The exact meaning can depend on the manufacturer, so it needs to be checked for your make. |
| Family | Powertrain (P) |
Typical symptoms
Engine running hotter than normal
High or unstable temperature gauge
Weak cabin heating
Fans running for a long time
Common causes
Thermostat stuck closed
Worn water pump or damaged impeller
Faulty auxiliary electric pump, if fitted
Partly clogged radiator or hoses
Stuck coolant control valve, if fitted
What to do
How to read code P00B7
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00B7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (B7) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00B7 mean?
Engine coolant flow low or not as expected. The control unit detected that the coolant in the engine is circulating less than it should, or not correctly. The code points to a circulation problem, but does not say which component is the cause. The exact meaning can depend on the manufacturer, so it needs to be checked for your make.
Can I keep driving with code P00B7 active?
With caution: limp mode possible, have it checked soon
Common causes — P00B7
Low coolant level or air in the circuit Thermostat stuck closed Worn water pump or damaged impeller Faulty auxiliary electric pump, if fitted Partly clogged radiator or hoses Stuck coolant control valve, if fitted
How do you fix code P00B7?
First check the coolant level with the engine cold and look for leaks under the car. If the temperature gauge climbs, stop at once and switch off the engine: an overheated engine can suffer serious damage, so do not put the check off.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00B6 — Radiator and engine coolant temperature do not cor...
- Next code: P00B8 — Pressure and air flow mismatch, bank 2
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2