Skip to content
Fault code dictionary (DTC)

P00C4 — Turbo bypass valve B mechanical fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a mechanical problem in bypass valve B of the turbocharger or supercharger: the valve is not moving as it should, for example stuck open or closed. The electrical command may be fine.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power
Boost too low or too high
Whistling or metallic noises from the turbo
Possible limp mode

Common causes

Valve stuck by dirt or carbon
Damaged diaphragm or actuator
Broken or seized linkage
Leaks in the vacuum or pressure circuit
Internal damage to the turbo or supercharger

What to do

Have the valve and its actuator inspected. Avoid hard driving: with boost out of control there is a risk of damaging the turbo and the engine.

How to read code P00C4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00C4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (C4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00C4 mean?

Turbo bypass valve B mechanical fault. The control unit detected a mechanical problem in bypass valve B of the turbocharger or supercharger: the valve is not moving as it should, for example stuck open or closed. The electrical command may be fine.

Can I keep driving with code P00C4 active?

With caution: limp mode possible, have it checked soon

Common causes — P00C4

Valve stuck by dirt or carbon Damaged diaphragm or actuator Broken or seized linkage Leaks in the vacuum or pressure circuit Internal damage to the turbo or supercharger

How do you fix code P00C4?

Have the valve and its actuator inspected. Avoid hard driving: with boost out of control there is a risk of damaging the turbo and the engine.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes