P00C5 — Turbocharger B turbine overspeed
| Meaning | The control unit detected that turbine B of the turbocharger or supercharger exceeded its maximum permitted speed. This can damage the turbo. Which turbine is "B" depends on the engine layout, for example a twin-turbo system. |
| Family | Powertrain (P) |
Typical symptoms
High-pitched whistle or abnormal turbo noises
Loss of power or limited power
Boost pressure out of control
Smoke from the exhaust
Common causes
Stuck actuator or variable geometry
Leaks or blockages in the boost circuit
Faulty turbo speed or pressure sensor
Worn or damaged turbo
What to do
How to read code P00C5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P00C5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (C5) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P00C5 mean?
Turbocharger B turbine overspeed. The control unit detected that turbine B of the turbocharger or supercharger exceeded its maximum permitted speed. This can damage the turbo. Which turbine is "B" depends on the engine layout, for example a twin-turbo system.
Can I keep driving with code P00C5 active?
With caution: limp mode possible, have it checked soon
Common causes — P00C5
Wastegate or bypass valve not regulating properly Stuck actuator or variable geometry Leaks or blockages in the boost circuit Faulty turbo speed or pressure sensor Worn or damaged turbo
How do you fix code P00C5?
Use the car as little as possible and have the boost control system checked soon. With a turbine spinning too fast, carrying on can cost you the turbo.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P00C4 — Turbo bypass valve B mechanical fault
- Next code: P00C6 — Fuel rail pressure too low during cranking, bank 1
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000C — Camshaft A position slow response, bank 2