Skip to content
Fault code dictionary (DTC)

P00CA — Fuel pressure regulator A solenoid supply voltage high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects too high a voltage in the supply to the solenoid of fuel pressure regulator A. It may come from a short to supply voltage, a wiring problem or a faulty solenoid.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Hard or uneven starting
Loss of power
Irregular fuel pressure
Possible limp mode

Common causes

Wiring shorted to supply voltage
Faulty regulator solenoid
Corroded connector contacts
Power supply or ground problem in the circuit
Control unit problem, less common

What to do

Check the regulator connector and wiring. Have the circuit tested soon with the proper tools, because an abnormal voltage can damage other components too.

How to read code P00CA

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00CA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (CA) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00CA mean?

Fuel pressure regulator A solenoid supply voltage high. The control unit detects too high a voltage in the supply to the solenoid of fuel pressure regulator A. It may come from a short to supply voltage, a wiring problem or a faulty solenoid.

Can I keep driving with code P00CA active?

With caution: limp mode possible, have it checked soon

Common causes — P00CA

Wiring shorted to supply voltage Faulty regulator solenoid Corroded connector contacts Power supply or ground problem in the circuit Control unit problem, less common

How do you fix code P00CA?

Check the regulator connector and wiring. Have the circuit tested soon with the proper tools, because an abnormal voltage can damage other components too.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes