Skip to content
Fault code dictionary (DTC)

P00CC — Fuel volume regulator solenoid supply voltage low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the voltage feeding the fuel volume regulator solenoid, usually on the high-pressure pump, is lower than expected. Without the correct signal the regulator cannot meter the fuel sent to the rail properly. The engine computer may limit power to protect the engine.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Hard starting or no start
Loss of power or limp mode
Rough running or hesitation when accelerating
Sudden engine stalls

Common causes

Corroded or loose regulator connector or wiring
Damaged supply or ground wire, or one with high resistance
Weak battery or low system voltage
Regulator solenoid failed internally
Faulty driver inside the engine control unit (rare)

What to do

Check the battery and charging voltage first, then the connector and wires at the regulator. Don't ignore this one: if the car loses power or stalls, avoid driving it on the road and have the fuel system checked.

How to read code P00CC

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00CC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (CC) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00CC mean?

Fuel volume regulator solenoid supply voltage low. The control unit detected that the voltage feeding the fuel volume regulator solenoid, usually on the high-pressure pump, is lower than expected. Without the correct signal the regulator cannot meter the fuel sent to the rail properly. The engine computer may limit power to protect the engine.

Can I keep driving with code P00CC active?

With caution: limp mode possible, have it checked soon

Common causes — P00CC

Corroded or loose regulator connector or wiring Damaged supply or ground wire, or one with high resistance Weak battery or low system voltage Regulator solenoid failed internally Faulty driver inside the engine control unit (rare)

How do you fix code P00CC?

Check the battery and charging voltage first, then the connector and wires at the regulator. Don't ignore this one: if the car loses power or stalls, avoid driving it on the road and have the fuel system checked.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes