Skip to content
Fault code dictionary (DTC)

P00D8 — Turbo bypass valve B temperature too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected or estimated a temperature that is too high at the bypass (or pressure relief) valve of turbo B. An overheated valve can work badly or be damaged. How the temperature is estimated depends on the manufacturer, so the exact cause has to be found on the individual car.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power or limp mode
Unusual turbo noises such as whistling or whining
Smoke or burnt oil smell in extreme cases
Turbo responding with a delay

Common causes

Insufficient cooling of the turbo or engine bay
Bypass valve stuck or not closing properly
Hot gas leak near the valve
Faulty temperature sensor or wiring
Prolonged heavy-load use with a very hot engine

What to do

Check the coolant level and circulation, and the condition of the valve and its ducts. If the engine temperature is high or you hear turbo noises, stop and switch off the engine, because overheating can damage the turbo.

How to read code P00D8

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00D8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (D8) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00D8 mean?

Turbo bypass valve B temperature too high. The control unit detected or estimated a temperature that is too high at the bypass (or pressure relief) valve of turbo B. An overheated valve can work badly or be damaged. How the temperature is estimated depends on the manufacturer, so the exact cause has to be found on the individual car.

Can I keep driving with code P00D8 active?

With caution: limp mode possible, have it checked soon

Common causes — P00D8

Insufficient cooling of the turbo or engine bay Bypass valve stuck or not closing properly Hot gas leak near the valve Faulty temperature sensor or wiring Prolonged heavy-load use with a very hot engine

How do you fix code P00D8?

Check the coolant level and circulation, and the condition of the valve and its ducts. If the engine temperature is high or you hear turbo noises, stop and switch off the engine, because overheating can damage the turbo.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes