Skip to content
Fault code dictionary (DTC)

P00D9 — Ambient air temperature sensor B circuit fault

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a general problem in the circuit of the second ambient air temperature sensor (sensor B). The outside temperature is used to correct some engine strategies and is also shown on the dashboard. The code does not specify whether the fault is voltage too low, too high or unstable.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Wrong or missing outside temperature on the dashboard
Automatic climate control regulating poorly
Cold starts less smooth in some cases
Usually no other driving problem

Common causes

Corroded or loose sensor connector
Broken or shorted wiring
Failed sensor
Sensor damaged by impact or water intrusion
Problem in the control unit or module reading the sensor (rare)

What to do

Check the position, connector and wiring of the sensor, usually near the front bumper or the mirror. It is normally not urgent, but it should be fixed to get correct readings.

How to read code P00D9

This is an informational entry: it normally does not limit how the vehicle works.

The code P00D9 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (D9) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00D9 mean?

Ambient air temperature sensor B circuit fault. The control unit detected a general problem in the circuit of the second ambient air temperature sensor (sensor B). The outside temperature is used to correct some engine strategies and is also shown on the dashboard. The code does not specify whether the fault is voltage too low, too high or unstable.

Can I keep driving with code P00D9 active?

With caution: limp mode possible, have it checked soon

Common causes — P00D9

Corroded or loose sensor connector Broken or shorted wiring Failed sensor Sensor damaged by impact or water intrusion Problem in the control unit or module reading the sensor (rare)

How do you fix code P00D9?

Check the position, connector and wiring of the sensor, usually near the front bumper or the mirror. It is normally not urgent, but it should be fixed to get correct readings.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes