Skip to content
Fault code dictionary (DTC)

P00DE — Charge air cooler coolant temperature sensor A circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a problem in the circuit of sensor A, which measures the coolant temperature of the water-cooled charge air cooler, the heat exchanger that cools the air compressed by the turbo. Without this data the control unit does not know how well the air is being cooled and may limit power as a precaution.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Loss of power or limp mode
Charge air cooler fan or pump working abnormally
Higher fuel consumption
Possible other codes about charge air cooling

Common causes

Corroded or loose sensor connector
Broken or shorted wiring
Failed sensor
Low coolant level or air in the charge air cooler circuit
Control unit problem (rare)

What to do

Check the sensor connector and wiring and the coolant level in the charge air cooler circuit, which is separate from the engine's. If power is limited, have the car checked soon.

How to read code P00DE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00DE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (DE) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00DE mean?

Charge air cooler coolant temperature sensor A circuit. The control unit detected a problem in the circuit of sensor A, which measures the coolant temperature of the water-cooled charge air cooler, the heat exchanger that cools the air compressed by the turbo. Without this data the control unit does not know how well the air is being cooled and may limit power as a precaution.

Can I keep driving with code P00DE active?

With caution: limp mode possible, have it checked soon

Common causes — P00DE

Corroded or loose sensor connector Broken or shorted wiring Failed sensor Low coolant level or air in the charge air cooler circuit Control unit problem (rare)

How do you fix code P00DE?

Check the sensor connector and wiring and the coolant level in the charge air cooler circuit, which is separate from the engine's. If power is limited, have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes