Skip to content
Fault code dictionary (DTC)

P00DD — Ambient air temperature sensor B intermittent/erratic

Severity: Informational Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is getting a signal from ambient air temperature sensor B that jumps or drops out at times. The fault comes and goes, often with vibration, moisture or temperature changes. That is why it can be hard to track down.
FamilyPowertrain (P)

Typical symptoms

Check engine light on intermittently
Outside temperature on the dashboard jumping
Automatic climate control inconsistent
No other obvious driving problem

Common causes

Connector with poor contact or corrosion
Wiring with a nearly broken or chafed wire
Sensor with an intermittent internal fault
Water intrusion in the connector
Problem in the control unit or module reading the sensor (rare)

What to do

Gently move the connector and wiring with the sensor connected to see whether the reading jumps, and look for signs of moisture or chafing. It is not urgent for driving, but a poor contact tends to get worse.

How to read code P00DD

This is an informational entry: it normally does not limit how the vehicle works.

The code P00DD starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (DD) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00DD mean?

Ambient air temperature sensor B intermittent/erratic. The control unit is getting a signal from ambient air temperature sensor B that jumps or drops out at times. The fault comes and goes, often with vibration, moisture or temperature changes. That is why it can be hard to track down.

Can I keep driving with code P00DD active?

With caution: limp mode possible, have it checked soon

Common causes — P00DD

Connector with poor contact or corrosion Wiring with a nearly broken or chafed wire Sensor with an intermittent internal fault Water intrusion in the connector Problem in the control unit or module reading the sensor (rare)

How do you fix code P00DD?

Gently move the connector and wiring with the sensor connected to see whether the reading jumps, and look for signs of moisture or chafing. It is not urgent for driving, but a poor contact tends to get worse.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes