Skip to content
Fault code dictionary (DTC)

P00E5 — Intake air and fuel temperature readings do not agree

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer compares intake air temperature with fuel temperature and found values that don't match as expected, for example after a long period with the engine off. One of the two sensors, or their wiring, is probably giving a wrong reading. The exact limits are set by the manufacturer and I don't know them in general.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Slightly uncertain cold starts
Rough idle
Slight loss of performance
No obvious symptoms in some cases

Common causes

Intake air temperature sensor reading off
Faulty fuel temperature sensor
Corroded connector or damaged wiring
Sensor near a heat source that skews the reading
Faulty engine computer (rare)

What to do

With the engine fully cold, after sitting overnight, compare the two temperatures with a scan tool: they should be close. The sensor that differs is the one to check, along with its connector. You can keep using the car, but have it checked soon.

How to read code P00E5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P00E5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (E5) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P00E5 mean?

Intake air and fuel temperature readings do not agree. The engine computer compares intake air temperature with fuel temperature and found values that don't match as expected, for example after a long period with the engine off. One of the two sensors, or their wiring, is probably giving a wrong reading. The exact limits are set by the manufacturer and I don't know them in general.

Can I keep driving with code P00E5 active?

With caution: limp mode possible, have it checked soon

Common causes — P00E5

Intake air temperature sensor reading off Faulty fuel temperature sensor Corroded connector or damaged wiring Sensor near a heat source that skews the reading Faulty engine computer (rare)

How do you fix code P00E5?

With the engine fully cold, after sitting overnight, compare the two temperatures with a scan tool: they should be close. The sensor that differs is the one to check, along with its connector. You can keep using the car, but have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes