P01A3 — Alternative fuel rail pressure sensor circuit fault
| Meaning | The control unit has detected an electrical problem in the circuit of the sensor that measures pressure in the rail, which is the distribution line for the alternative fuel such as LPG or natural gas. The signal is missing or outside the expected range. This code applies to vehicles with a second fuel system. |
| Family | Powertrain (P) |
Typical symptoms
Switching to the main fuel or being unable to use the alternative one
Engine running roughly or hesitating
Loss of power
Hard starting or stalling
Common causes
Damaged, broken or shorted wiring
Faulty rail pressure sensor
Supply or ground problem at the sensor
Fault in the gas system control unit or engine control unit, which is rare
What to do
How to read code P01A3
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P01A3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (A3) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P01A3 mean?
Alternative fuel rail pressure sensor circuit fault. The control unit has detected an electrical problem in the circuit of the sensor that measures pressure in the rail, which is the distribution line for the alternative fuel such as LPG or natural gas. The signal is missing or outside the expected range. This code applies to vehicles with a second fuel system.
Can I keep driving with code P01A3 active?
With caution: limp mode possible, have it checked soon
Common causes — P01A3
Corroded or loose sensor connector Damaged, broken or shorted wiring Faulty rail pressure sensor Supply or ground problem at the sensor Fault in the gas system control unit or engine control unit, which is rare
How do you fix code P01A3?
Check the sensor connector and wiring without taking apart any part of the gas system. Work on the alternative fuel circuit should be left to a qualified technician. If the engine stalls or hesitates, use the main fuel and have the car checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P01A2 — Alternative fuel tank A pressure sensor signal err...
- Next code: P01A4 — Alternative fuel rail pressure sensor performance...
Related codes
- P0100 — Mass air flow sensor: general circuit fault
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass air flow sensor: signal too high
- P0104 — Mass air flow sensor: intermittent signal
- P0105 — Manifold/barometric pressure sensor: general circuit fault
- P0106 — Manifold/barometric pressure sensor: implausible reading
- P0107 — Manifold/barometric pressure sensor: signal too low
- P0108 — Manifold/barometric pressure sensor: signal too high
- P0109 — Manifold/barometric pressure sensor: intermittent signal
- P010A — Mass air flow sensor B: circuit fault
- P010B — Air flow sensor B: signal out of range or implausible