P01AA — Alternative fuel tank temperature sensor circuit fault
| Meaning | The control unit has detected an electrical problem in the circuit of the temperature sensor for the alternative fuel tank, such as LPG or natural gas. The signal is missing or outside the expected range. This code applies to vehicles with a second fuel system. |
| Family | Powertrain (P) |
Typical symptoms
Less precise alternative fuel metering
Switching to the main fuel in some cases
Incorrect gas level reading
Uncertain starting on the alternative fuel
Common causes
Damaged, broken or shorted wiring
Faulty tank temperature sensor
Supply or ground problem at the sensor
Fault in the gas system control unit or engine control unit, which is rare
What to do
How to read code P01AA
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P01AA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (AA) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P01AA mean?
Alternative fuel tank temperature sensor circuit fault. The control unit has detected an electrical problem in the circuit of the temperature sensor for the alternative fuel tank, such as LPG or natural gas. The signal is missing or outside the expected range. This code applies to vehicles with a second fuel system.
Can I keep driving with code P01AA active?
With caution: limp mode possible, have it checked soon
Common causes — P01AA
Corroded or loose sensor connector Damaged, broken or shorted wiring Faulty tank temperature sensor Supply or ground problem at the sensor Fault in the gas system control unit or engine control unit, which is rare
How do you fix code P01AA?
Check the sensor connector and wiring without taking apart any part of the gas system. Work on the alternative fuel circuit should be left to a qualified technician. The car can usually be driven on the main fuel, but have the fault checked within a reasonable time.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P01A9 — Alternative fuel rail pressure too high
- Next code: P01AB — Alternative fuel tank temperature sensor performan...
Related codes
- P0100 — Mass air flow sensor: general circuit fault
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass air flow sensor: signal too high
- P0104 — Mass air flow sensor: intermittent signal
- P0105 — Manifold/barometric pressure sensor: general circuit fault
- P0106 — Manifold/barometric pressure sensor: implausible reading
- P0107 — Manifold/barometric pressure sensor: signal too low
- P0108 — Manifold/barometric pressure sensor: signal too high
- P0109 — Manifold/barometric pressure sensor: intermittent signal
- P010A — Mass air flow sensor B: circuit fault
- P010B — Air flow sensor B: signal out of range or implausible