P01AB — Alternative fuel tank temperature sensor performance problem
| Meaning | The control unit has found that the signal from the temperature sensor of the alternative fuel tank does not match what it expects, for example it stays fixed or disagrees with the outside and engine temperatures. The electrical circuit does not appear to be broken, but the reading is not believable. |
| Family | Powertrain (P) |
Typical symptoms
Less precise alternative fuel metering
Rough running on the alternative fuel
Switching to the main fuel for no clear reason
Range on the alternative fuel seeming different from usual
Common causes
Connector or wiring with a poor contact
Truly abnormal tank temperature
Ground or supply problem at the sensor
Control unit fault, which is rare
What to do
How to read code P01AB
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P01AB starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (AB) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P01AB mean?
Alternative fuel tank temperature sensor performance problem. The control unit has found that the signal from the temperature sensor of the alternative fuel tank does not match what it expects, for example it stays fixed or disagrees with the outside and engine temperatures. The electrical circuit does not appear to be broken, but the reading is not believable.
Can I keep driving with code P01AB active?
With caution: limp mode possible, have it checked soon
Common causes — P01AB
Dirty, aged or faulty tank temperature sensor Connector or wiring with a poor contact Truly abnormal tank temperature Ground or supply problem at the sensor Control unit fault, which is rare
How do you fix code P01AB?
Check the sensor connector and wiring, then have the system checked by a qualified technician, who can compare the reported temperature with the real one. Do not take apart gas system parts yourself. You can use the main fuel in the meantime.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P01AA — Alternative fuel tank temperature sensor circuit f...
- Next code: P01AC — Alt. fuel tank temperature sensor: signal too low
Related codes
- P0100 — Mass air flow sensor: general circuit fault
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass air flow sensor: signal too high
- P0104 — Mass air flow sensor: intermittent signal
- P0105 — Manifold/barometric pressure sensor: general circuit fault
- P0106 — Manifold/barometric pressure sensor: implausible reading
- P0107 — Manifold/barometric pressure sensor: signal too low
- P0108 — Manifold/barometric pressure sensor: signal too high
- P0109 — Manifold/barometric pressure sensor: intermittent signal
- P010A — Mass air flow sensor B: circuit fault
- P010B — Air flow sensor B: signal out of range or implausible