Skip to content
Fault code dictionary (DTC)

P01AE — Alt. fuel tank temperature sensor: erratic signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is getting a signal from the alternative fuel tank temperature sensor that jumps or drops out at times. The value does not match what the temperature could really do. Most often it is an electrical contact that comes and goes.
FamilyPowertrain (P)

Typical symptoms

Check engine light that comes and goes
Sudden switches from gas to petrol
Gas level reading that jumps around
Starting on gas sometimes difficult
Fault appearing with vibration or after washing

Common causes

Loose or corroded connector
Wiring with a partly broken wire
Sensor with an intermittent internal fault
Moisture in the connector
Weak ground or supply contact

What to do

With the engine off, gently move the sensor connector and wiring to check for play or signs of moisture. This kind of fault tends to get worse, so have it checked without waiting too long.

How to read code P01AE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P01AE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (AE) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P01AE mean?

Alt. fuel tank temperature sensor: erratic signal. The control unit is getting a signal from the alternative fuel tank temperature sensor that jumps or drops out at times. The value does not match what the temperature could really do. Most often it is an electrical contact that comes and goes.

Can I keep driving with code P01AE active?

With caution: limp mode possible, have it checked soon

Common causes — P01AE

Loose or corroded connector Wiring with a partly broken wire Sensor with an intermittent internal fault Moisture in the connector Weak ground or supply contact

How do you fix code P01AE?

With the engine off, gently move the sensor connector and wiring to check for play or signs of moisture. This kind of fault tends to get worse, so have it checked without waiting too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes