Skip to content
Fault code dictionary (DTC)

P01AF — Alt. fuel tank A level sensor: circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found an electrical problem in the level sensor circuit of alternative fuel tank A (for example LPG or CNG). This is a general report: it does not say whether the signal is too high or too low. The gas level shown may be wrong.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Gas level gauge wrong or stuck
Odd switching between gas and normal fuel
Unreliable gas range
Gas starting refused in some cases

Common causes

Corroded or loose level sensor connector
Damaged wiring
Failed level sensor
Gas control unit problem (rare)

What to do

Check the connector and wiring of the level sensor at the tank. Since the level may be unreliable, do not trust the gauge, and have the gas system checked with a live data reading.

How to read code P01AF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P01AF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (AF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P01AF mean?

Alt. fuel tank A level sensor: circuit fault. The control unit found an electrical problem in the level sensor circuit of alternative fuel tank A (for example LPG or CNG). This is a general report: it does not say whether the signal is too high or too low. The gas level shown may be wrong.

Can I keep driving with code P01AF active?

With caution: limp mode possible, have it checked soon

Common causes — P01AF

Corroded or loose level sensor connector Damaged wiring Failed level sensor Gas control unit problem (rare)

How do you fix code P01AF?

Check the connector and wiring of the level sensor at the tank. Since the level may be unreliable, do not trust the gauge, and have the gas system checked with a live data reading.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes