Skip to content
Fault code dictionary (DTC)

P01DF — Cylinder 11 injection timing too retarded

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that fuel injection in cylinder 11 happens later than the commanded moment. The cylinder burns its fuel late and performs worse than the others. The code does not by itself say which part has failed.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough engine running
Loss of power under load
Hesitation when accelerating
Dark smoke or fuel smell from the exhaust
Vibration at idle

Common causes

Cylinder 11 injector slow, dirty or worn
Injector wiring or connector in poor condition
Low or unstable fuel pressure
Wrong signal from the crankshaft or camshaft sensors
Engine timing out of position
Internal control unit fault, which is rare

What to do

Start with the wiring and connector of the cylinder 11 injector and a reading of the live data, then check the fuel pressure. Don't ignore the code: a cylinder that runs badly for a long time can cause more serious damage.

How to read code P01DF

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P01DF starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (DF) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P01DF mean?

Cylinder 11 injection timing too retarded. The control unit detected that fuel injection in cylinder 11 happens later than the commanded moment. The cylinder burns its fuel late and performs worse than the others. The code does not by itself say which part has failed.

Can I keep driving with code P01DF active?

With caution: limp mode possible, have it checked soon

Common causes — P01DF

Cylinder 11 injector slow, dirty or worn Injector wiring or connector in poor condition Low or unstable fuel pressure Wrong signal from the crankshaft or camshaft sensors Engine timing out of position Internal control unit fault, which is rare

How do you fix code P01DF?

Start with the wiring and connector of the cylinder 11 injector and a reading of the live data, then check the fuel pressure. Don't ignore the code: a cylinder that runs badly for a long time can cause more serious damage.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes