Skip to content
Fault code dictionary (DTC)

P043B — Catalyst temperature sensor out of range, bank 2 sensor 2

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit receives a temperature reading from the catalytic converter sensor (bank 2, downstream) that does not match what it expects for the driving conditions. The signal does arrive, but it is not believable. The cause can be the sensor, but also a converter or exhaust that is not working as it should.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Usually no noticeable change in driving
Possible loss of performance on some models
Possible failure at the emissions inspection

Common causes

Aged or drifting temperature sensor
Wiring or contacts with abnormal resistance
Exhaust leaks near the sensor
Degraded or clogged catalytic converter
Other engine faults that alter exhaust temperature

What to do

First check the sensor, its connector and the exhaust around it for leaks or damage. If you notice a loss of power or a smell of unburnt fuel, have the car checked soon, because the converter may be in trouble.

How to read code P043B

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P043B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (3B) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P043B mean?

Catalyst temperature sensor out of range, bank 2 sensor 2. The control unit receives a temperature reading from the catalytic converter sensor (bank 2, downstream) that does not match what it expects for the driving conditions. The signal does arrive, but it is not believable. The cause can be the sensor, but also a converter or exhaust that is not working as it should.

Can I keep driving with code P043B active?

With caution: limp mode possible, have it checked soon

Common causes — P043B

Aged or drifting temperature sensor Wiring or contacts with abnormal resistance Exhaust leaks near the sensor Degraded or clogged catalytic converter Other engine faults that alter exhaust temperature

How do you fix code P043B?

First check the sensor, its connector and the exhaust around it for leaks or damage. If you notice a loss of power or a smell of unburnt fuel, have the car checked soon, because the converter may be in trouble.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes