P0444 — Evaporative Emission System Purge Control Valve Circuit Open
| Meaning | Your car's computer has detected an open circuit in the purge control valve for the evaporative emission system. This means the electrical signal cannot reach the valve properly, so it cannot open to let fuel vapors from the charcoal canister enter the engine to be burned. |
| Family | Powertrain (P) |
Typical symptoms
Possible slight rough idle after refueling
Common causes
Damaged, frayed, or disconnected wiring to the purge valve connector
Blown fuse supplying power to the emission control components
What to do
How to read code P0444
This is an informational entry: it normally does not limit how the vehicle works.
The code P0444 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (44) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0444 mean?
Evaporative Emission System Purge Control Valve Circuit Open. Your car's computer has detected an open circuit in the purge control valve for the evaporative emission system. This means the electrical signal cannot reach the valve properly, so it cannot open to let fuel vapors from the charcoal canister enter the engine to be burned.
Can I keep driving with code P0444 active?
Yes, no known limitation
Common causes — P0444
Faulty purge control valve with an internal electrical break Damaged, frayed, or disconnected wiring to the purge valve connector Blown fuse supplying power to the emission control components
How do you fix code P0444?
Have a mechanic check the electrical connector and wiring leading to the purge valve first, then test the valve itself for electrical continuity. It is not an immediate emergency that will strand you on the side of the road, but it should be looked at during your next routine service.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0443 — Evaporative Emission Control System Purge Control...
- Next code: P0445 — Evaporative Emission Control System Purge Control...
Related codes
- P0400 — Exhaust Gas Recirculation Flow Malfunction
- P0401 — EGR: insufficient recirculation flow
- P0402 — EGR: excessive recirculation flow
- P0403 — EGR control circuit
- P0404 — EGR: control circuit range/performance
- P0405 — Exhaust Gas Recirculation Sensor A Circuit Low
- P0406 — Exhaust Gas Recirculation Sensor A Circuit High
- P0407 — Exhaust Gas Recirculation Sensor B Circuit Low
- P0408 — Exhaust Gas Recirculation Sensor B Circuit High
- P0409 — Exhaust Gas Recirculation Sensor A Circuit
- P040A — EGR Temperature Sensor A Circuit
- P040B — EXHAUST GAS RECIRCULATION TEMPERATURE SENSOR 1 CIRCUIT PERFO...