Skip to content
Fault code dictionary (DTC)

P049E — EGR B control position exceeded learning limit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit learns the reference position of the second EGR valve to compensate for dirt and wear. The code means it has exceeded the correction limit and can no longer compensate.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Rough idle
Loss of power
Increased emissions
Possible limp mode

Common causes

Dirty EGR B valve or stiff movement
Clogged EGR passages
Worn valve or position sensor
Damaged wiring or connector
Relearn not repeated after a replacement

What to do

Check the EGR B valve for cleanliness and free movement. After any work, the learning procedure may need repeating with a suitable tool.

How to read code P049E

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P049E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (9E) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P049E mean?

EGR B control position exceeded learning limit. The control unit learns the reference position of the second EGR valve to compensate for dirt and wear. The code means it has exceeded the correction limit and can no longer compensate.

Can I keep driving with code P049E active?

With caution: limp mode possible, have it checked soon

Common causes — P049E

Dirty EGR B valve or stiff movement Clogged EGR passages Worn valve or position sensor Damaged wiring or connector Relearn not repeated after a replacement

How do you fix code P049E?

Check the EGR B valve for cleanliness and free movement. After any work, the learning procedure may need repeating with a suitable tool.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes