Skip to content
Fault code dictionary (DTC)

P04B1 — Refueling vapor control valve circuit low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is seeing too low a voltage on the control circuit of the refueling vapor valve. This usually points to a wire touching ground or a short circuit inside the valve. The valve therefore cannot be commanded correctly.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Fuel nozzle clicking off early
Slow or difficult refueling
Fuel smell
Failed emissions inspection

Common causes

Control wire touching ground
Valve shorted internally
Connector or wiring damaged by moisture
Pinched wiring near the tank
Faulty control unit, which is rare

What to do

First check the valve's wiring and connector, looking for worn insulation or moisture. The car can usually still be used, but have it checked soon.

How to read code P04B1

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04B1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (B1) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04B1 mean?

Refueling vapor control valve circuit low. The control unit is seeing too low a voltage on the control circuit of the refueling vapor valve. This usually points to a wire touching ground or a short circuit inside the valve. The valve therefore cannot be commanded correctly.

Can I keep driving with code P04B1 active?

With caution: limp mode possible, have it checked soon

Common causes — P04B1

Control wire touching ground Valve shorted internally Connector or wiring damaged by moisture Pinched wiring near the tank Faulty control unit, which is rare

How do you fix code P04B1?

First check the valve's wiring and connector, looking for worn insulation or moisture. The car can usually still be used, but have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes