Skip to content
Fault code dictionary (DTC)

P04E4 — Crankcase vent hose sensor: erratic or intermittent signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer is getting a signal from the crankcase ventilation hose connection sensor that drops in and out or changes erratically. This usually points to an electrical contact that breaks at times, for example because of vibration. The code is standardized, but sensor details vary by manufacturer.
FamilyPowertrain (P)

Typical symptoms

Check engine light coming on and going off
Occasionally rough idle
Occasional smell of oil or fumes
No constant symptoms
Code returns after being read

Common causes

Sensor connector with poor contact
Wiring chafed or damaged by vibration
Moisture or corrosion in the connector
Sensor starting to fail
Ventilation hose not securely fixed
Engine computer fault (rare)

What to do

Gently move the wiring and connector with the engine running and see whether the fault appears. Also check that the hose is secure. Intermittent faults tend to get worse, so don't ignore it.

How to read code P04E4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04E4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (E4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04E4 mean?

Crankcase vent hose sensor: erratic or intermittent signal. The engine computer is getting a signal from the crankcase ventilation hose connection sensor that drops in and out or changes erratically. This usually points to an electrical contact that breaks at times, for example because of vibration. The code is standardized, but sensor details vary by manufacturer.

Can I keep driving with code P04E4 active?

With caution: limp mode possible, have it checked soon

Common causes — P04E4

Sensor connector with poor contact Wiring chafed or damaged by vibration Moisture or corrosion in the connector Sensor starting to fail Ventilation hose not securely fixed Engine computer fault (rare)

How do you fix code P04E4?

Gently move the wiring and connector with the engine running and see whether the fault appears. Also check that the hose is secure. Intermittent faults tend to get worse, so don't ignore it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes