Skip to content
Fault code dictionary (DTC)

P04F3 — Catalyst heater bank 2: supply voltage fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer found a problem with the voltage feeding the bank 2 catalyst heater. The heater helps the catalytic converter reach working temperature faster after a cold start. Few manufacturers use this code, and I don't have reliable information on the exact value judged abnormal on your brand.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Higher emissions after a cold start
Failed emissions test
No obvious change in driving
Possible warning message on the dashboard

Common causes

Faulty heater fuse or relay
Damaged or corroded supply wiring
Connector with abnormal resistance
Battery or charging system with unstable voltage
Faulty catalyst heater
Engine computer fault (rare)

What to do

Check the heater's fuses, relays and supply connectors, and verify the battery and alternator. Bank 2 exists only on engines with two cylinder banks, so confirm which side it is. Don't put the check off for long.

How to read code P04F3

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P04F3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (F3) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P04F3 mean?

Catalyst heater bank 2: supply voltage fault. The engine computer found a problem with the voltage feeding the bank 2 catalyst heater. The heater helps the catalytic converter reach working temperature faster after a cold start. Few manufacturers use this code, and I don't have reliable information on the exact value judged abnormal on your brand.

Can I keep driving with code P04F3 active?

With caution: limp mode possible, have it checked soon

Common causes — P04F3

Faulty heater fuse or relay Damaged or corroded supply wiring Connector with abnormal resistance Battery or charging system with unstable voltage Faulty catalyst heater Engine computer fault (rare)

How do you fix code P04F3?

Check the heater's fuses, relays and supply connectors, and verify the battery and alternator. Bank 2 exists only on engines with two cylinder banks, so confirm which side it is. Don't put the check off for long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes