P0B46 — HV battery voltage sensor C: signal out of range
| Meaning | The hybrid or EV control unit read a value from battery voltage sensor C that does not make sense, for example one that disagrees with the other sensors or with the expected value. Which part of the pack sensor C monitors is set by the manufacturer, so the exact position must be checked in your car's wiring diagram. The code points to a measurement problem, not necessarily a failed battery. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Combustion engine running more than usual on a hybrid
Battery charge gauge jumping or not matching reality
Charging that stops or will not start
Common causes
Damaged wiring in the measuring circuit or abnormal resistance
Faulty sensor or cell monitoring board
Real voltage imbalance between cell groups
Internal fault in the battery management unit
What to do
How to read code P0B46
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B46 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (46) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B46 mean?
HV battery voltage sensor C: signal out of range. The hybrid or EV control unit read a value from battery voltage sensor C that does not make sense, for example one that disagrees with the other sensors or with the expected value. Which part of the pack sensor C monitors is set by the manufacturer, so the exact position must be checked in your car's wiring diagram. The code points to a measurement problem, not necessarily a failed battery.
Can I keep driving with code P0B46 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B46
Corroded or loose connector at the sensor or battery Damaged wiring in the measuring circuit or abnormal resistance Faulty sensor or cell monitoring board Real voltage imbalance between cell groups Internal fault in the battery management unit
How do you fix code P0B46?
The traction battery works at high voltage: do not open any covers or touch the orange cables, checks must be done by qualified personnel. Have the car inspected promptly and, if the light stays on or power drops, avoid long trips.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B45 — Hybrid/EV battery voltage sense C circuit fault
- Next code: P0B47 — HV battery voltage sensor C: signal too low
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high