Skip to content
Fault code dictionary (DTC)

P0B4A — HV battery voltage sensor D circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a general fault in the circuit of traction battery voltage sensor D. The code does not say whether the signal is too high, too low or unstable, only that the measurement cannot be trusted. Which part of the pack letter D covers is set by the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Reduced power or limp mode
Inconsistent charge indicator
Limited charging
Unusual combustion engine use on hybrids

Common causes

Corroded or loose connector
Damaged measuring-circuit wiring
Faulty sensor or cell monitoring board
Real imbalance between cell groups
Battery management unit fault

What to do

Do not touch the orange cables or open the battery pack. Have live data read by a shop qualified for high-voltage work, and do not put it off, especially if power drops.

How to read code P0B4A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B4A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (4A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B4A mean?

HV battery voltage sensor D circuit fault. The control unit detected a general fault in the circuit of traction battery voltage sensor D. The code does not say whether the signal is too high, too low or unstable, only that the measurement cannot be trusted. Which part of the pack letter D covers is set by the manufacturer.

Can I keep driving with code P0B4A active?

With caution: limp mode possible, have it checked soon

Common causes — P0B4A

Corroded or loose connector Damaged measuring-circuit wiring Faulty sensor or cell monitoring board Real imbalance between cell groups Battery management unit fault

How do you fix code P0B4A?

Do not touch the orange cables or open the battery pack. Have live data read by a shop qualified for high-voltage work, and do not put it off, especially if power drops.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes