P0B4B — HV battery voltage sensor D: signal out of range
| Meaning | The value read by traction battery voltage sensor D is not plausible, for example it disagrees with other sensors or the total voltage. The problem lies in the measurement, but it can also point to a real imbalance between cells. Letter D is a manufacturer designation. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Charge indicator jumping
Interrupted or slower charging
Combustion engine stepping in more on hybrids
Common causes
Sensor wiring with abnormal resistance
Faulty sensor or monitoring board
Real voltage imbalance between cells
Battery management unit fault
What to do
How to read code P0B4B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B4B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (4B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B4B mean?
HV battery voltage sensor D: signal out of range. The value read by traction battery voltage sensor D is not plausible, for example it disagrees with other sensors or the total voltage. The problem lies in the measurement, but it can also point to a real imbalance between cells. Letter D is a manufacturer designation.
Can I keep driving with code P0B4B active?
With caution: limp mode possible, have it checked soon
Common causes — P0B4B
Connector or terminals with poor contact Sensor wiring with abnormal resistance Faulty sensor or monitoring board Real voltage imbalance between cells Battery management unit fault
How do you fix code P0B4B?
This is a high-voltage system: checks belong to qualified personnel. Have it checked soon and, if power drops, limit use of the car.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B4A — HV battery voltage sensor D circuit fault
- Next code: P0B4C — HV battery voltage sensor D: signal too low
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high