P0C1C — Auxiliary transmission pump module temperature sensor fault
| Meaning | The control unit detected a general problem in the circuit of the temperature sensor inside the electric transmission fluid pump module. The module cannot reliably read its own temperature, so it cannot protect itself from overheating. |
| Family | Powertrain (P) |
Typical symptoms
Start-stop or electric driving limited
Gearbox reacting slowly
Pump running unevenly
No obvious symptom in mild cases
Common causes
Faulty module connector or wiring
Pump control module failure
Supply problem to the module
Electrical interference on the communication line
What to do
How to read code P0C1C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C1C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (1C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C1C mean?
Auxiliary transmission pump module temperature sensor fault. The control unit detected a general problem in the circuit of the temperature sensor inside the electric transmission fluid pump module. The module cannot reliably read its own temperature, so it cannot protect itself from overheating.
Can I keep driving with code P0C1C active?
With caution: limp mode possible, have it checked soon
Common causes — P0C1C
Failure of the sensor inside the module Faulty module connector or wiring Pump control module failure Supply problem to the module Electrical interference on the communication line
How do you fix code P0C1C?
Have the fault read by a workshop with a suitable tool: the sensor is inside the module, so the whole unit often has to be replaced. You can drive with care, but don't delay if you notice gearbox problems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C1B — Auxiliary transmission pump module overheating
- Next code: P0C1D — Auxiliary transmission pump module temperature imp...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open