P0C1D — Auxiliary transmission pump module temperature implausible
| Meaning | The control unit found that the temperature value read by the sensor inside the electric transmission fluid pump module is not plausible. For example it stays fixed or varies in a way that doesn't match real conditions. The reading can't be trusted. |
| Family | Powertrain (P) |
Typical symptoms
Start-stop or electric driving limited
Gearbox with delayed reactions
Pump running unevenly
No obvious symptom in mild cases
Common causes
Control module with a partial fault
High-resistance connection
Supply problem to the module
Real temperature abnormal due to a pump fault
What to do
How to read code P0C1D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C1D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (1D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C1D mean?
Auxiliary transmission pump module temperature implausible. The control unit found that the temperature value read by the sensor inside the electric transmission fluid pump module is not plausible. For example it stays fixed or varies in a way that doesn't match real conditions. The reading can't be trusted.
Can I keep driving with code P0C1D active?
With caution: limp mode possible, have it checked soon
Common causes — P0C1D
Degraded internal temperature sensor Control module with a partial fault High-resistance connection Supply problem to the module Real temperature abnormal due to a pump fault
How do you fix code P0C1D?
A workshop can compare the temperature read with the real one and assess the pump and module. It's usually not an immediate emergency, but don't leave it too long: the module can't protect itself well from heat.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C1C — Auxiliary transmission pump module temperature sen...
- Next code: P0C1E — Auxiliary transmission pump module temperature sen...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open