P0C20 — Auxiliary transmission pump phases U-V-W open circuit
| Meaning | The control unit detected an interruption in the circuit of the three phases (U, V, W) that power the electric transmission fluid pump motor. Without these phases the pump doesn't turn or turns badly, and the gearbox may lose fluid pressure when the combustion engine is off. |
| Family | Powertrain (P) |
Typical symptoms
Gearbox engaging late after a stop
Harsh or missing gear engagement
Start-stop disabled
No noise from the pump
Gearbox slipping
Common causes
Broken wiring between module and pump
Interrupted winding in the pump motor
Faulty control module
Seized or worn pump
What to do
How to read code P0C20
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C20 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (20) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C20 mean?
Auxiliary transmission pump phases U-V-W open circuit. The control unit detected an interruption in the circuit of the three phases (U, V, W) that power the electric transmission fluid pump motor. Without these phases the pump doesn't turn or turns badly, and the gearbox may lose fluid pressure when the combustion engine is off.
Can I keep driving with code P0C20 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C20
Loose or corroded pump connector Broken wiring between module and pump Interrupted winding in the pump motor Faulty control module Seized or worn pump
How do you fix code P0C20?
Have the pump connector and wiring checked right away at a workshop. If the gearbox won't engage or slips, don't keep driving: lack of fluid pressure can damage the gearbox.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C1F — Auxiliary transmission pump module temperature sen...
- Next code: P0C21 — Auxiliary transmission pump phases U-V-W low circu...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open