P0C21 — Auxiliary transmission pump phases U-V-W low circuit
| Meaning | The control unit detected a voltage that is too low in the phase circuit (U, V, W) of the electric transmission fluid pump motor. It may indicate a short to ground or between phases, or a failure of the pump or its module. |
| Family | Powertrain (P) |
Typical symptoms
Gearbox engaging late after a stop
Harsh or uncertain gear engagement
Start-stop disabled
Abnormal or absent noise from the pump
Possible burning smell from the compartment
Common causes
Shorted winding in the pump motor
Wet or damaged connector
Faulty control module
Seized pump drawing too much current
What to do
How to read code P0C21
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C21 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (21) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C21 mean?
Auxiliary transmission pump phases U-V-W low circuit. The control unit detected a voltage that is too low in the phase circuit (U, V, W) of the electric transmission fluid pump motor. It may indicate a short to ground or between phases, or a failure of the pump or its module.
Can I keep driving with code P0C21 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C21
Shorted wiring between module and pump Shorted winding in the pump motor Wet or damaged connector Faulty control module Seized pump drawing too much current
How do you fix code P0C21?
Have the wiring, connector and pump checked at a workshop without waiting. If you smell burning or the gearbox doesn't engage well, stop and have the vehicle checked before going on.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C20 — Auxiliary transmission pump phases U-V-W open circ...
- Next code: P0C22 — Auxiliary transmission fluid pump motor phase U-V-...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open